ADS H206

ADS H206 is a low molecular weight, solid polyvinyl acetate. It is designed for use in solvent based coatings, inks and adhesives or melt extrusion systems.



Rapidly dissolves in most organic solvents

Can be melt processed

Easily plasticised

Can be combined with other M Grades

Excellent substrate adhesion & high film flexibility

Very high light stability


ADS H206 is manufactured on a dedicated polymerisation plant and is produced in the form of colourless beads.

Available Documents

TDS Download

Technical Informations

Application Advice/Typical Applications

Dissolving - ADS H206 is soluble in many organic solvents such as esters, ketones, aromatic hydrocarbons and lower alcohols. A more detailed list is available on the datasheet Solvent Solubility and Plasticiser Compatibility. ADS H206 should be added carefully to the solvent system under sufficient agitation to ensure dispersion of the polymer beads.
Melt - ADS H206 is thermoplastic and will gradually soften and flow with increasing temperature. At temperatures >120 °C, the polymer can be mixed as received with EVA resins to formulate thermomouldable fabrics. Resins with a higher vinyl acetate content generally show better compatibility. ADS H206 can also be used in the formulation of heat activated coatings and adhesives.
Compatibility - ADS H206 is compatible with other M Grade polymers, and can be mixed in any proportion to modify either solution or dry film properties. ADS H206 can be plasticised with many types of plasticiser to modify film properties. Further details are available on request.

Solvent based adhesives including parquet flooring. Solvent based inks & coatings. Thermomouldable fabrics. Heat seal adhesives.

Shipping and Storage

ADS H206 is a very thermoplastic solid. To prevent sticking of the polymer beads the product should be stored in dry conditions, below +15 °C (+59 °F) out of direct sunlight. Pallets should not be stacked. Under these conditions the product has a storage life of at least 24 months from date of delivery. Product which has been stored for longer than 24 months should be tested before use. ADS H206 is supplied in 25kg paper sacks each marked with the grade reference and batch number. The minimum order quantity is 1000kg on a stretch wrapped pallet.

Product Security/Health and Safety

Before handling, please read the Safety Data Sheet of this product for advice on safety, use and disposal.

Effluents and Pollution Control

Before handling, please read the Safety Data Sheet of this product for advice on safety, use and disposal.

For further information regarding this product please refer to:

McInnes, Malcolm
Phone: +44(0)1279 436211


Character Value Unit
Total Solid Content >99.0
Viscosity 20% in ETAc @ 20°C 12 - 17 mPa.s 
Typical softening point 90 °C 
Typical molecular weight 65.000  
Tg 36 +/-2 °C 
Appearance Solid, colourless beads  

© 2014 Synthomer plc

Home » Markets & Products » Productfinder » Products A-Z » Technical datasheet

  • Paper & Board
  • Construction & Coatings
  • Health & Protection
  • Carpet, Compounds & Foam
  • Functional Polymers
  • Performance Polymers
  • Productfinder
  •     Products A-Z
  •     Products by Specifications