PLEXTOL R 815

PLEXTOL R 815 is an acrylic copolymer dispersion.

Available Documents

TDS Download

Technical Informations

Application Advice/Typical Applications

This product may show discoloration if formaldehyde containing or formaldehyde releasing additives (like biocides) are used. For more information on this product, please contact our Technical Service Team.

PLEXTOL R 815 is a fine particle size, surfactant stabilised, heterogeneous dispersion. PLEXTOL R 815 offers high gloss, block resistance, wet adhesion, alkali and water resistance. PLEXTOL R 815 is recommended for gloss paints, varnishes and stains.

Shipping and Storage

Store at an even temperature of between +5°C and +35°C avoiding frost and direct sunlight. Stir product before use. If stored according to these conditions and in the original unopened containers, the dispersion will be stable for 12 months following delivery. Product should be used as soon as possible after opening. Detailed information is available on request.

Product Security/Health and Safety

Before handling, please read the Safety Data Sheet of this product for advice on safety, use and disposal.

Effluents and Pollution Control

Before handling, please read the Safety Data Sheet of this product for advice on safety, use and disposal.

For further information regarding this product please refer to:

Zieglerova, Jeaneta
Phone: +420 737 206 966
FAX:
eMail: Jeaneta.Zieglerova@synthomer.com


Properties

Character Value Unit
Total Solids 50.0
pH 8.7  
Viscosity 2,000 mPa.s 
Particle Size 0.11 microns 
Minimum film forming temperature (MFFT) 0 °C 
Specific Gravity (Dispersion) 1.04  
Specific Gravity (Dry Polymer) 1.08  


© 2014 Synthomer plc

Home » Markets & Products » Productfinder » Products A-Z » Technical datasheet

  • Paper & Board
  • Construction & Coatings
  • Health & Protection
  • Carpet, Compounds & Foam
  • Functional Polymers
  • Performance Polymers
  • Productfinder
  •     Products A-Z
  •     Products by Specifications