PLEXTOL D 207

PLEXTOL D 207 is an aqueous emulsion of a thermoplastic acrylic polymer.

Available Documents

TDS Download

Technical Informations

Application Advice/Typical Applications


PLEXTOL D 207 is protected against bacterial attack during storage. In the manufacture of finished products, the material has to be re-treated, as usual, with suitable agents to give enhanced preservation. Film properties Evaporation of the water above the minimum film-forming temperature leaves a clear, colourless film whith low inner strength, which is very soft and extremely tacky at room temperature. To be particularly emphasised is its hydrophobic character. The film is soluble in organic solvents. The extremely soft film does not enable determination of the tackiness and mechanical properties tensile test according to DIN EN ISO 527, torsion pendulum test according to DIN EN ISI 527). Instruction for use - PLEXTOL D 207 can be diluted with water to provide liquors of any desired concentration. - PLEXTOL D 207 possesses high electrolytic stability and is compatible with flameproofing agents. - PLEXTOL D 207 can be thickened by means of thickener emulsions (e. g. ROHAGIT SD 15), thickener solutions (e. g. Rohagit SL 606 ¹) and cellulose or starch derivatives to provide printing, nip-padding and coating compounds. - PLEXTOL D 207 can be applied by the usual methods such as spraying, impregnating, printing, padding and coating. - By mixing PLEXTOL D 207 with other emulsions from the PLEXTOL range, the film properties of the former can be influenced within wide limits and thus adapted to the intended application. - Silicone-coated papers, PP or PE films are suitable maskings for the self-adhesive coating. Applications - PLEXTOL D 207 is used as a tackifier in the manufacture of dispersion adhesives.

Shipping and Storage

Store at an even temperature of between +5°C and +35°C avoiding frost and direct sunlight. Stir product before use. If stored according to these conditions and in the original unopened containers, the dispersion will be stable for 12 months following delivery. Product should be used as soon as possible after opening. During processing, storage and transport, avoid any contact with metals (including non-ferrous metals) which are not protected against corrosion. Detailed information is available on request.

Product Security/Health and Safety

Before handling, please read the Safety Data Sheet of this product for advice on safety, use and disposal.

Effluents and Pollution Control

Before handling, please read the Safety Data Sheet of this product for advice on safety, use and disposal.

For further information regarding this product please refer to:

Dr. Greiner, Katja
Phone: +49(0)2365-49-9816
FAX: +49(0)2365-49-6510
eMail: katja.greiner@synthomer.com


Properties

Character Value Unit
Solids Content 55
pH Value 8.5  
Viscosity (Brookfield RVT 2/20) 600 mPa s 
Glass Transition Temperature - 40 °C 
Density 1.03 g/cm³ 
Mean Particle Size 0.23 µm 
Ionic Character anionic  
Minimum Film-Forming Temperature < 0 °C 


© 2014 Synthomer plc

Home » Markets & Products » Productfinder » Products A-Z » Technical datasheet

  • Paper & Board
  • Construction & Coatings
  • Health & Protection
  • Carpet, Compounds & Foam
  • Functional Polymers
  • Performance Polymers
  • Productfinder
  •     Products A-Z
  •     Products by Specifications