PLEXTOL D 487

PLEXTOL D 487 is a finely dispersed aqueous dispersion of a methacrylic ester-acrylic ester copolymer. The dispersion contains an anionic emulsifier system and is free from film forming aids, solvents, and plasticizers.

Available Documents

TDS Download

Technical Informations

Application Advice/Typical Applications

PLEXTOL D 487 is preserved against bacterial and fungal attack. In the manufacture of finished products, the material has to be retreated, as usual, with suitable biocides to give enhanced preservation.

PLEXTOL D 487 is a non-yellowing, light-resistant pure acrylic dispersion, which is characterized by excellent weatherability. PLEXTOL D 487 is modified with adhesion promotors and owing to that especially qualified as binder in house paints exhibiting good adhesion to diverse substrates. Due to the soft polymer the amount of added coalescent agent and the VOC content of the paint can be limited.

Shipping and Storage

PLEXTOL D 487 is supplied in road tankers or in non-returnable plastics drums secured by a lid with clamping ring or in non-returnable palletized bulk containers (net weight 1,000 kg). PLEXTOL D 487 has to be stored protected from frost and, as far as possible, below 40 °C. Storage at temperatures between + 5 and + 30 °C is recommendable. PLEXTOL D 487 contains a preservative to counter microbial attack during transportation. To protect it against germination during subsequent storage, absolutely stringent plant hygiene and, under certain circumstances, the addition of suitable preservatives will be necessary. Care must be taken to ensure that drums and storage containers are tightly closed. During processing, storage and transport of the product contact with metals unprotected against corrosion (likewise non-ferrous metals) has to be avoided. When stored correctly PLEXTOL D 487 has a storage life of 12 months from date of delivery.

Product Security/Health and Safety

Before handling, please read the Safety Data Sheet of this product for advice on safety, use and disposal.

Effluents and Pollution Control

Before handling, please read the Safety Data Sheet of this product for advice on safety, use and disposal.

For further information regarding this product please refer to:

Zieglerova, Jeaneta
Phone: +420 737 206 966
FAX:
eMail: Jeaneta.Zieglerova@synthomer.com


Properties

Character Value Unit
Solids Content 50
pH Value 8.0
Viscosity (Brookfield LVT Spindle 2/6 Upm) 2500 mPa s 
Glass Transition Temperature 14 °C 
Density 1.05 g/cm³ 
Mean Particle Size 0.1 µm 
Minimum Film-Forming Temperature 4 °C 
Surface Tension 42 mN/m 
Water Absorption (24h) 9
Tensile Strength 10 N/mm² 
Elongation at Break 500


© 2014 Synthomer plc

Home » Markets & Products » Productfinder » Products A-Z » Technical datasheet

  • Paper & Board
  • Construction & Coatings
  • Health & Protection
  • Carpet, Compounds & Foam
  • Functional Polymers
  • Performance Polymers
  • Productfinder
  •     Products A-Z
  •     Products by Specifications